VSEK 7.3L Injector Rebuild Kit Shim Kit Compatible with 1994-2003 Ford 7.3L, HEUI Injectors with Vice Clamp, Special Tools, Springs & O-Ring Seal Kit

Injector Rebuild Kit Shim Kit Application: Works on most HEUI injectors, Compatible with 1994-2003 Ford 7.3L, International T444E/DT466e/1530E, Compatible with Cat 3126B top solenoid, International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors. Replace to part number # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014. Material: O-rings are made of wear-resistant Teflon coated; Shim and washers are made of standard stainless steel; Special tools and other tools are manufactured to standard; Durable, not easy to break, impact resistant, anti-corrosion, rust-resistant, long service life. Kits Includes: Injector Tune Up shim Kits 12pcs .004" thick Armature Washers, stainless steel 12pcs .002" thick Armature Washers, stainless steel 45pcs .002" thick Solenoid Washers, stainless steel 45pcs .003" thick Solenoid Washers, stainless steel Special Torx Tools 1pcs Special IP15 Torx to remove Solenoid Screws 2pcs Special reverse TORX PLUS MAXX to remove stock armature security screws 1pcs T10 Torx to install the 10 new DPS0010 screw 1pcs Special tool to remove and reuse any striped-out solenoid screws 2pcs 1/4" X 3" Magnetic bit holder to remove armature and solenoid screws in truck. Use it with 1/4" Box end wrench Special Tool Set 1 set (2pcs) .002" feeler gauge & .004" feeler gauge to check clearances 1pcs Wool dauber helps add oil to the brass cup before installing your injectors. 10pcs DPS0010 hardened screws with T10 Torx heads A Complete HEUI Injector Seal Kits 8 sets (48pcs) DPS008 wear resistant Teflon coated OEM proved EXTERNAL O-ring 8 sets (24pcs) INTERNAL O-ring seal kit 8pcs poppet springs 8pcs nozzle springs 20pcs check balls (2 check balls Req. for each injector) 8pcs New Heavy Duty Spiral Solid stainless Steel Back up Rings to Replace Standard Slit Steel Back

• FITMENT: Works on most HEUI injectors; Compatible with 1994 - 2003 7.3L Ford, HEUI injectors
• REPLACEMENT: This fuel injector rebuild kit contains everything required to rebuild all 8 injectors for HEUI injectors. Kit includes washers (.002" / .004"), DPS0010 screws, IP15 Torx, T10 Torx, feeler gauge (.002" / .004"), Fuel Injector O-Ring Seal Kit, Vise Clamp and stainless Steel Back up Rings [as pictured]. Easy to fix ‘HARD TO START’ issue when cold without removing the injectors
• DIRECT REPLACEMENT: Replace for # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014
• FUNCTION: Kit includes stainless- steel washers & solenoid spacer shims. If the clearance between your armature plate and adapter plate is causing cold start issues, you can install the washers to increase the clearance back to .004" to .005" (like new injectors). Placed solenoid shims under all four corners of the solenoid (for a total of .005"), to increase the Solenoid to armature clearance to near factory specs, when solenoid is energized
• MATERIAL: Premium material used on this kit to protect them from all the dirt, oil that could potentially break down the tool performance. Corrosion-resistant, wear-resistant, and rust-resistant